Avaya C460 - Manual (Page 95)

Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide 83
set broadcast storm control threshold
User level: read-write, admin.
Use the set broadcast storm control threshold command to set the
broadcast storm control threshold.
The syntax for this command is:
set broadcast storm control threshold <threshold>
Example:
set device-mode
User level: read-write, admin.
Use the set device-mode command to set the switch mode – Layer 2 or Router
(Layers 2 and 3).
The syntax for this command is:
set device-mode <mode>
Example:
L You need to install the appropriate license before you can set the device mode to
Router.
threshold In pps (packets per second) from 10 to 144,000 pps
The default value is 500
C460-1# set broadcast storm control threshold 1000
Done!
mode • Router – switch operates at Layers 2 and 3.
• layer2 – switch operates at Layer 2.
C460-1(super)# set device-mode Router
This command will RESET the switch****
Reset **** do you want to continue (Y/N) ?
Done!