Avaya C460 - Manual (Page 48)

Chapter 2 Avaya C460 CLI Commands
36 Avaya C460 Reference Guide
interface
User level: read-write, admin.
L If you are at the “read-write” user level, you can only access this command in
Configure mode.
Type configure at the command prompt to enter configure mode.
Use the interface command to create and enter the Interface Configuration
Mode.
Use the no interface command to delete a specific IP interface.
The syntax for this command is:
[no] interface <interface name>
Example:
If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
interface name String (up to 32 characters)
C460-1(configure)# interface marketing
Done!
Router-1(config-if:marketing)#