Avaya C460 - Manual (Page 34)

Chapter 2 Avaya C460 CLI Commands
22 Avaya C460 Reference Guide
Example:
clear rmon2 statistics
User level: read-write, admin.
Use the clear rmon2 statistics command to delete rmon2 (AnyLayer SMON)
statistics.
The syntax for this command is:
clear rmon2 statistics
Example:
clear screen
User level: read-only, read-write, admin.
Use the clear screen command to clear the screen.
The syntax for this command is:
clear screen
clear snmp trap
User level: read-write, admin.
Use the clear snmp trap command to clear an entry from the SNMP trap
receiver table.
The syntax for this command is:
clear snmp trap {<rcvr_addr>|all}
C460-1(super)# clear radius authentication server secondary
Router-1# clear rmon2 statistics
Done!
rcvr_addr IP address or IP alias of the trap receiver (the SNMP management
station) to clear
all Keyword that specifies every entry in the SNMP trap receiver
table