Lenze E84DGFCR - Manual (Page 14)

Communication manual 8400 motec PROFINET
Product description
Features and variants
14
L
EDS84DMOTPNET EN 2.0 - 11/2011
3.2 Features and variants
The PROFINET Communication Unit is available in the following versions:
 The PROFINET Communication Unit is ...
– mounted to the Wiring Unit (E84DGVNxx);
– supplied internally via the Drive Unit (E84DGDVxxxxxxxx) or externally via a
separate voltage source.
 The I/O connections can be brought into the device via M12 connectors or cable glands.
 Devices without an integrated safety system (safety option) have no analog input and
no relay output.
 The integrated safety system of the E84DGFCRxJx Communication Units can be used
on machines for the protection of persons.
 Support of the I&M0...4 functionality for the identification of the standard device
 Automatic detection of the baud rate 100 Mbps
 A line topology is enabled by the integrated 2-port switch.
 Support of the LLDP protocol for the topology recognition
 Support of the SNMP protocol for diagnostic purposes
 Exchange of up to 8 process data words per direction
 Communication with the Lenze »Engineer« (access to all Lenze parameters) is executed
via the diagnostic interface of the Drive Unit.
 An online connection via PROFINET is possible with the Lenze »Engineer«.
Product series Type designation Features
Enclosure IP
65
PR
OFIN
ET
M12 I/
O:
T
er
m
in
al
I/
O:
M1
2
Sa
fe
ty
Inverter Drives 8400 motec
PROFINET Communication Unit
E84DGFCRANP z z z
E84DGFCR9NP z z z
E84DGFCRAJP z z z z
E84DGFCR9JP z z z z

"Inverter Drives 8400 motec" hardware manual
Here you will find detailed information on the integrated safety system (safety
option).
Software manual / »Engineer« online help for the "Inverter Drive 8400 motec"
Here you will find detailed information on how to configure the safety system
(safety option).