2 electrical installation, 1 network topology, Electrical installation – Lenze E84DGFCR User Manual
Page 22: Network topology, Communication manual 8400 motec profinet, Sd d d, Cs s s
Communication manual 8400 motec PROFINET
Installation
Electrical installation
22
L
EDS84DMOTPNET EN 2.0 - 11/2011
5.2
Electrical installation
5.2.1
Network topology
It is typical of PROFINET to have a rather free topology the limiting factor of which is large
message latencies due to e.g. switches connected in series.
The combination of a line and a stub is useful for system wiring.
PROFINET supports the following topologies:
Switch / star
[5-2]
Switch / star topology (S = switch, D = I/O device)
Tree via switches
[5-3]
Tree topology (C =I/O controller, S = switch)
"Inverter Drives 8400 motec" hardware manual
Here you will find detailed information about ...
• the digital and analog inputs/outputs;
• the relay output;
• the integrated safety system (safety option);
• the wiring of the connections.
Observe the notes and wiring instructions included.
E94YCER005
S
D
D
D
E94YCER006
C
S
S
S