Communication manual 8400 motec profinet – Lenze E84DGFCR User Manual
Page 36
Communication manual 8400 motec PROFINET
Commissioning
Establishing an online connection via PROFINET with the Lenze »Engineer«
36
L
EDS84DMOTPNET EN 2.0 - 11/2011
In the »Engineer«, by means of the menu command Online Set communication path and
go online, you can select the PROFINET communication path. The PROFINET nodes
configured previously are shown in the Communication path dialog window:
If the device access path is not configured correcty, here the
IP address of the controller
selected in the display field can be entered manually.
Via
Search/Enter you can establish a connection to devices which have not appeared
in the display field. Corresponding settings for this can be made in the dialog window Enter
IP address, which is shown:
Here you can enter an
IP address manually or execute the following actions using the
buttons:
Execute the console command
Ping.
Assign the IP address via the
Configurator.
Settings via the PROFINET configurator of the »Engineer«
Select the device access path to the desired controller by clicking
Find.
After having established the online connection, you can continue work with the
»Engineer« as usual.