Lenze E84DGFCR - Manual (Page 68)

Communication manual 8400 motec PROFINET
Error messages
Short overview of the PROFINET error messages
68
L
EDS84DMOTPNET EN 2.0 - 11/2011
12 Error messages
This chapter complements the error list in the software manual and the »Engineer« online
help for the Inverter Drive 8400 motec by PROFINET error messages.
12.1 Short overview of the PROFINET error messages
The following table contains all PROFINET error messages in numerical order of the error
number. Furthermore the preset error response and - if applicable – the parameter for
setting the error response is specified.

Tip!
When you click the cross-reference in the first column, you will get to the detailed
description (causes and remedies) of the corresponding error message.

Software manual/»Engineer« online help for the "Inverter Drive 8400 motec"
General information on diagnostics & fault analysis and error messages is
provided here.
Error no.
[hex]
Subject area
no.
[dec]
Error no.
[dec]
Error text Error type
(Error response)
Can be set in
0x01bc3100 444 12544 PROFINET: Exist. connect. to 8400 lost 1: Error C01501/2
0x01bc5531 444 21809 PROFINET: Memory: No access 1: Error C01501/2
0x01bc5532 444 21810 PROFINET: Memory: Read error 1: Error -
0x01bc5533 444 21811 PROFINET: Memory: Write error 1: Error -
0x01bc6010 444 24592 PROFINET: Restart by watchdog reset 1: Error C01501/2
0x01bc6011 444 24593 PROFINET: Internal error 1: Error C01501/2
0x01bc6100 444 24832 PROFINET: Internal error 1: Error C01501/2
0x01bc6101 444 24833 PROFINET: Internal error 1: Error C01501/2
0x01bc641f 444 25631 PROFINET: Invalid parameter set 1: Error C01501/2
0x01bc6420 444 25632 PROFINET: Error: Lenze setting loaded 1: Error -
0x01bc6430 444 25648 PROFINET: Invalid module configuration 1: Error C01501/2
0x01bc6501 444 25857 PROFINET: Record parameter: Invalid read 4: Warning locked -
0x01bc6502 444 25858 PROFINET: Record parameter: Invalid write 4: Warning locked -
0x01bc6503 444 25859 PROFINET: Data output status bad 4: Warning locked -
0x01bc6531 444 25905 PROFINET: Data_Exchange status quit 0: None C13880/1
0x01bc6532 444 25906 PROFINET: Station name error 1: Error -
0x01bc6533 444 25907 PROFINET: IIP address error 1: Error -
0x01bc6534 444 25908 PROFINET: Stack init error 1: Error -
0x01bc6650 444 26192 PROFINET: Internal error 1: Error -