Lenze E84DGFCR - Manual (Page 63)

EDS84DMOTPNET EN 2.0 - 11/2011
L
63
Communication manual 8400 motec PROFINET
Monitoring
Internal communication fault
10.2 Internal communication fault
 The response in the case of a communication error between the Communication Unit
and the Drive Unit can be set via code C01501 .
 The Communication Unit reports a connection interruption to the IO controller and
changes to the "No_Data_Exchange" state.
 The error message " PROFINET: Exist. conn. to 8400 lost [0x01bc3100] "
( 69)
is output.