Lenze E84DGFCR User Manual
Page 16
![background image](/manuals/565825/16/background.png)
Communication manual 8400 motec PROFINET
Product description
Connections and interfaces
16
L
EDS84DMOTPNET EN 2.0 - 11/2011
By default, the PROFINET connections and the LEDs for the PROFINET status displays are
already mounted and wired:
– PROFINET port 1 at plug connector X31
– PROFINET port 2 at plug connector X32
– LEDs to plug connector X55
It is also possible to connect the PROFINET and other inputs and outputs (e.g. digital
inputs) via the positions A1 ... A4 and B1 ... B4.
For the connections, 5-pin M12 connectors or - alternatively - cable glands (cable cross-
section max. 1.0 mm
2
, AWG 18) can be used.
The M12 connectors, cable glands and prefabricated system cables can be obtained
from various manufacturers.
Wire the M12 connectors or cable glands used to the corresponding contacts of the
terminal strips/plug connectors X3, X4 and X61.
"Inverter Drives 8400 motec" hardware manual
Observe the notes and wiring instructions included.