Lenze E84DGFCR - Manual (Page 37)

EDS84DMOTPNET EN 2.0 - 11/2011
L
37
Communication manual 8400 motec PROFINET
Commissioning
Initial switch-on
6.6 Initial switch-on
Establishing communication
 To establish communication, the controller must be supplied with mains voltage.
 The external voltage supply serves to keep up PROFINET communication in the event of
a main supply failure.
 External voltage supply
( 25)
 During mains connection, all parameters (codes) are read.
 If an error occurs, the error message "CE04: MCI communication error" (error no.
01.0127.00002) is output.
 Addressing can be effected automatically via the IO controller or manually via codes in
the »Engineer«.
 Setting the station name
( 28)
 For addressing the controller, a valid IP configuration is required if communication
between the PC/»Engineer« and the controller is to be effected via PROFINET.
 Setting the IP configuration
( 30)