Lenze 8615E - Manual (Page 12)

10
2.4 Application as directed
The controllers of the 8600 series are electrical equipment intended
for installation in control cabinets of high power plants.
The controllers are directed as components
•
for the control of variable speed drives with three-phase AC
motors.
•
for the installation in control cabinets or control boxes.
•
for the assembly together with other components to form a
drive system.
•
The controllers correspond to the Low-Voltage EMC directive.
•
Drive systems with the 8600 controllers which are installed
according to the requirements of the CE-typical drive systems
correspond to the EC directive relating to EMC (see chapter
4.2.2).
The CE-typical drive with the 8600 controllers are suitable for
•
the operation on public and non-public mains systems.
•
the use in industrial areas as well and in residential and
commercial premises.
•
Because of the earth-potential reference of the RFI filter, the
described CE-typical drive systems are not suitable for the
connection to IT mains (mains without earth-reference
potential).
•
The controllers are not domestic appliances. They are intended
as drive-system components for commercial use.
•
The controllers themselves are not machines for the purpose of
the EC directive relating to machinery.