Lenze EDB9300UES - Manual (Page 154)

Commissioning
BA8230 149
5.6.2 Ratings We will now enter the type data. This includes the mains voltage, the motor data and
the load mode.
Select the main menu option 06 = RATINGS on the control unit.
06=RATINGS
The type data includes the following parameters:
Rated inverter voltage
*)
Inverter kVA
*)
Mains voltage
Break type
Nom.Motor power
Nom.Motor voltage
Nom.Motor speed
Nom.Motor frequency
Type of circuit (Star/Delta)
Nom.Motor current
Cos Phi
Motor type
*)
Stall torque/Rated torque
Graduated number
Adjust mode
Adjust to 0
R-stator + R-cable
Fan Trigger
*)
Display only
The following parameters are to be set if they do not match the factory settings:
- Mains voltage with which the 8230 frequency inverter is to be operated.
- Break type The braking device permits electrical braking and
prevents an excessive rise in the link voltage. The braking
device takes effect at U
D
> 750 V.
Show/Hide Bookmarks