Lenze EDB9300UES - Manual (Page 98)

Operation and Software
BA8230 93
4.2 Parameter adjustment Key control Selection in the relevant control level is with the “Up( 5 ) and
“Down” ( 6 ) keys. You move one level lower or save or
confirm a value by pressing “Enter” ( 4 ). You move back up
one level using the “Menu” key ( 3 ).
Display control The flashing cursor indicates your present level and the item
you can select using the “Up” (
5
) and “Down” (
6
) keys.
- The code and the relevant menu option appears on the first line in the “main
menu” level.
The second line is blank.
02 = APPLIKATION PAR.
A cursor flashes to the left next to the code. This indicates that you can change
the code (= Menu block) using the “Up” (
5 ) and “Down” ( 6 ) keys.
- After selecting the menu block required (in this case 02 Application parameter)
using the “Up” (
5
) / “Down” (
6
) keys you can return to the “Select parameter”
level using “Enter” ( 4 ).
The display then appears as follows:
02 Speed limit
5 1/min
1. line: The “02” indicates the code for the menu block (in this case the
application parameter). It no longer flashes as the menu block is
already selected.
The first parameter of the relevant menu block (in this case “Speed
limit”) appears to the right next to the code. The flashing cursor is
positioned on the first letter of the parameter. It indicates that you are
now on the “Select parameter” level. The parameter for the menu
block already selected can now be selected with the “Up” (
5 ) and
“Down” ( 6 ) keys.
2. line: The value of the relevant parameter is displayed here. It has not yet
been selected.
When you have selected the parameter required using the
“Up” (
5 ) / “Down” ( 6 ) keys, you can move to the “Adjust value” level
by pressing the “Enter” (
4
) key.
Show/Hide Bookmarks