8 configuring the drive, Configuring the drive – Lenze EDB9300UES User Manual
Page 161
Advertising
Commissioning
156
BA8230
5.8 Configuring the drive See
section
4.3
Select the menu "02 = Application parameters" and adjust the parameter required.
When using fixed demands the digital inputs (terminals :14 and :15) are to be
adjusted accordingly.
- Select the following main menu options consecutively:
03=CONFIGURATION
04=ANALOG I/O
05=DIGITAL I/O
and adjust accordingly.
Section 4.4 describes the meaning of these parameters.
Show/Hide Bookmarks
Advertising