Lenze EDB9300UES - Manual (Page 22)

Technical Data
BA8230 17
2.3.2 CE mark The 8230 frequency inverter frequency inverter carries the CE mark. This confirms for
monitoring authorities responsible in the European Union (EU) that the unit complies
with the low voltage guideline 73/23 EC and the CE mark guideline 93/68/EC.
The certificate of conformity with the low voltage guideline is available on request.
The 8230 frequency inverter frequency inverter is completed into a drive system by
the connection of an AC motor and electrical components, safety equipment and
external radio interference suppression components. Installation must be carried out
by
experienced personnel in compliance with the relevant rules and regulations.
No certificate of conformity is required for the 8230 frequency inverter as an
“independently operated unit” in the sense of EMC Directive 89/336/EC. The 8230
frequency inverter is classified according to CEMEP2 for use and supply through the
industry, trade and other users experienced in the field of electromagnetic
compatibility (EMC).
Type tests on electromagnetic compatibility (EMC) were carried out to demonstrate
compliance with the documented EMC-relevant IEC standards, DIN EN standards,
EMC installation guidelines and specified combinations with optional radio
interference suppression components in this operating manual when connected to an
earthed mains supply. Compliance with the EMC installation instructions in section 3.6
is essential.
Section 3.7 provides optional measures for guaranteeing EMC.
IEC 22G/21/CDV
EMC product standard including specific test methods for
power drive systems;
EMC product standard for drive converters;
EMC radiated interference and interference resistance.
DIN EN 50082
1)
Electromagnetic compatibility (EMC)
Specialist basic standard, interference resistance
Part 1: Residential, business and light industry connected to
the public electricity supply network
(VDE 0839 Part 82-1)
Part 2: Industrial
1)
VDE 0839 Part 82-2).
DIN EN 50081
Electromagnetic compatibility (EMC)
Specialist basic standard, radiated interference
Part 1: Residential, business and industrial connected to
the public electricity supply network
(VDE 0839 Part 81-1). Limit to EN 55011 Group 1 Class B
Part 2: Industrial
1)
(VDE 0839 Part 81-2). Limit to EN 55011 Group 1 Class A
1)
Compare ESD, burst and surge limits on the following page
Show/Hide Bookmarks