Lenze EDB9300UES - Manual (Page 99)

Operation and Software
94 BA8230
The display then appears as follows:
02 Speed limit
1490 1/min
The first line shows the menu block you are in (in this case 02 = Speed limit) and the
parameter you selected (in this case, maximum speed).
The flashing cursor on the second line is now located on the “1” as the highest value
digit. The cursor indicates that this value can be adjusted using the “Up” (
5 ) / “Down”
(
6
) keys. The digits are selected with the “Enter” (
4
) key and are adjusted with the
keys “Up” ( 5 ) / “Down” ( 6 ). When you have selected or adjusted the lowest value
digit the value is saved when you press the “Enter” (
4
) key. This is confirmed by the
display “Info: Parameter adjusted”. This message disappears automatically after 2
seconds.
If the control level “Change select list” does not contain a value as described above
but a select list instead (eg. German, English, French under the “Language”
parameter you can select a parameter by pressing the “Up” (
5 ) / “Down” ( 6 ) keys
and save it using “Enter” (
4
). This is also followed by the message “Info: “Parameter
adjusted”) for approx. 2 seconds.
Show/Hide Bookmarks