Lenze E82MVxxx 2Bxxx - Manual (Page 104)

Electrical installation
Mounting of function module (option)
5
l
104 EDK82MV371 DE/EN/FR 7.0
Mounting of function module (option)
(
Stop!
ƒ Control cables must always be shielded to prevent interference
injections!
ƒ Remove the FIF cover on the electronic module and the protection cover
of the function module. Otherwise the motec or the function module
may be damaged.
1a
1
4
6mm
2 1 mm
AWG 18
X3
PES
PES
klick
B
1a
2
3
1b
0.5...0.6 Nm
4.4...5.3 lb-in
A
8200mot153
1. Plug the function module into the support.
2. Remove the protection cover 1 of the function module and keep it.
3. Remove the FIF cover 0 and keep it!
4. Wiring: see mounting instructions for the function module