Lenze E82MVxxx 2Bxxx - Manual (Page 119)

Commissioning
Important controller codes
7
l
119 EDK82MV371 DE/EN/FR 7.0
IMPORTANT Possible settings Code
Selection Lenze Name No.
C0002
*
s
uSEr
(Contin
uation)
Transferring
parameter
sets with the
keypad Keypad ð PAR1 (+ FPAR1) Overwrite selected
parameter set and, if
required FPAR1, with the
corresponding data of
the keypad
71 with function module application I/O,
INTERBUS, PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
11 with all other function modules
Keypad ð PAR2 (+ FPAR1)
72 with function module application I/O,
INTERBUS, PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
12 with all other function modules
Keypad ð PAR3 (+ FPAR1)
73 with function module application I/O,
INTERBUS, PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
13 with all other function modules
Keypad ð PAR4 (+ FPAR1)
74 with function module application I/O,
INTERBUS, PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
14 with all other function modules
Controller ð keypad Copy all available
parameter sets
(PAR1 ... PAR4, if required
FPAR1) into the keypad
80 with function module application I/O,
INTERBUS, PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
20 with all other function modules
Keypad ð function module Only overwrite the
module−specific
parameter set FPAR1
with the data of the
keypad
40 only with function module INTERBUS,
PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
Function module ð keypad Only copy the
module−specific
parameter set FPAR1 into
the keypad
50 only with function module INTERBUS,
PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen