Lenze E82MVxxx 2Bxxx - Manual (Page 123)

Commissioning
Important controller codes
7
l
123 EDK82MV371 DE/EN/FR 7.0
IMPORTANT Possible settings Code
Selection Lenze Name No.
C0007
v
uSEr
(Contin
uation)
E4 E3 E2 E1
41 JOG1/3 DCB TRIP−Set DFIN1−ON
42 QSP DCB TRIP−Set DFIN1−ON
43 CW/CCW QSP TRIP−Set DFIN1−ON
44 UP DOWN PAR DFIN1−ON
45 CW/CCW QSP PAR DFIN1−ON
46 H/Re PAR QSP JOG1/3
47 CW/QSP CCW/QS
P
H/Re JOG1/3
48 PCTRL1−
OFF
DCB PCTRL1−
I−OFF
DFIN1−ON
49 PCTRL1−
OFF
JOG1/3 QSP DFIN1−ON
50 PCTRL1−
OFF
JOG1/3 PCTRL1−
I−OFF
DFIN1−ON
51 DCB PAR PCTRL1−
I−OFF
DFIN1−ON
255 Free configuration in C0410 Read only
Do not change C0007
since settings in C0410
may get lost
C0010
uSEr
Minimum
output
frequency 0.00 0.00
à 14.5 Hz
{0.02
Hz}
650.00 l C0010 not effective
in the case of bipolar
setpoint selection
(−10 V ... + 10 V)
l C0010 only limits the
analog input 1
l In the case of a max.
output frequency >
50 Hz the switching
threshold of the auto
DCB in C0019 has to
be increased.
l From software 3.5: If
C0010 > C0011, the
drive does not start
when controller
enable is set.
à Speed setting range 1
: 6 for Lenze geared
motors: For operation
with Lenze geared
motors has to be set
necessarily.
C0011
uSEr
Maximum
output
frequency 50.00 7.50
à 87 Hz
{0.02
Hz}
650.00