Rockwell Automation 284D ArmorStart - Safety Version - User Manual - Manual (Page 130)

4-60 Bulletin 284 Programmable Parameters for Sensorless Vector Controllers
A250 (Stp Logic Time 0)
A251 (Stp Logic Time 1)
A252 (Stp Logic Time 2)
A253 (Stp Logic Time 3)
A254 (Stp Logic Time 4)
A255 (Stp Logic Time 5)
A256 (Stp Logic Time 6)
A257 (Stp Logic Time 7)
Sets the time to remain in each step if the corresponding StpLogic command is set
to Step after Time. Parameter Number 250…257
Related Parameters
138, 155, 158, 161,
171…177, 240…247
Access Rule GET/SET
Data Type UINT
Group Advanced Program Group
Units 0.1 sec
Minimum Value 0.0 sec
Maximum Value 999.9 sec
Default Value 30.0 sec