Rockwell Automation 284D ArmorStart - Safety Version - User Manual - Manual (Page 18)

1-8 Product Overview
Dynamic Brake Resistor (Bulletin 284 only)
The IP67 Dynamic Brake Resistor plug and play design offers
simplicity in writing and installation. The factory installed option of
DB1 must be selected in order to have the quick disconnect
connectivity. The cable length of the IP67 Dynamic Brake Resistor is
available in two lengths, 0.5 meter and 1 meter. See Appendix F,
Accessories, for available IP67 Dynamic Brake Resistors.
Note: The IP67 Dynamic Brake Resistor is used only with the
-DB1 factory-installed option.
Shielded Motor Cable (Bulletin 284 only)
A 3 meter shielded 4-conductor cordset is provided instead of the 3
meter unshielded 4-conductor cordset. If the EMI Filter is selected, a
3 meter shielded 4-conductor cordset is provided as standard.