Rockwell Automation 1715-OF8I Redundant I/O System User Manual - Manual (Page 105)

Rockwell Automation Publication 1715-UM001C-EN-P - March 2014 105
Installation Instructions Chapter 2
Verify Coding Pegs
To verify that each coding peg, also known as a polarizing pin, is positioned
correctly, follow these steps.
1. Look at the diagram on the adapter base unit that shows the six possible
positions for a coding peg.
2. Examine a coding peg (fitted) and identify the index recess on the
hexagonal flange.
32062-M
Coding Peg
32063-M