Rockwell Automation 1715-OF8I Redundant I/O System User Manual User Manual
Page 203

Rockwell Automation Publication 1715-UM001C-EN-P - March 2014
203
1715 Redundant I/O System in SIL 2 Safety Applications
Chapter 6
• Using ControlLogix controllers in SIL 2 Applications Safety Reference
Manual, publication
for detailed requirements for
installing, programming, and operating a SIL 2 ControlLogix-based safety
system.
• For specifications and certifications relating to a 1715 Redundant I/O
system, refer to the 1715 Redundant I/O System Technical Specifications,
publicatio
.
These 1715 devices can be included in a SIL 2 system.
See the latest certifications for software and firmware a
All I/O modules include line monitoring capability. We recommend that line
monitoring be used for safety-related I/O. Safety-related I/O refers to an
annunciator being available to an input or output attached to a field device. For
energize-to-action (normally de-energized) I/O, you must enable line
monitoring.
Table 40 - 1715 Devices in a SIL 2 System
Cat. No.
Firmware
Revision
Description
Termination Assembly
Cat. No.
Description
1715-AENTR
2.001 or
later
Ethernet adapter redundant module
N/A
1715-IB16D
(1)
(1) 1715 I/O module firmware is displayed as the same level of the 17156-AENTR module’s firmware regardless of the actual firmware
level in the 1715 I/O module.
16-channel digital input module
1715-TASIB16D
Digital input simplex
1715-TADIB16D
Digital input duplex
1715-OB8DE
8-channel digital output module
1715-TAS0B8DE
Digital output simplex
1715-TADOB8DE
Digital output duplex
1715-IF16
16-channel analog input module
1715-TASIF16
Analog input simplex
1715-TADIF16
Analog input duplex
1715-OF8I
8-channel analog output module
1715-TASOF8
Analog output simplex
1715-TADOF8
Analog output duplex
1715-A2A
N/A
Adapter base unit
N/A
1715-A3IO
N/A
I/O module base unit
N/A
1715-N2T
N/A
Tall slot filler cover
N/A
1715-N2S
N/A
Short slot filler cover
N/A
1715-C2
N/A
Expansion cable - 2 m
N/A