Rockwell Automation 1715-OF8I Redundant I/O System User Manual - Manual (Page 158)

158 Rockwell Automation Publication 1715-UM001C-EN-P - March 2014
Chapter 5 Configure the Redundant I/O System
3. Name the module, enter the IP address, enter the Slot number (we chose 1
for this example).
4. Click Change.
5. Choose your Electronic Keying method, referring to
Appendix B .
6. Click OK.
7. To complete configuration of the 1756 Ethernet module, refer to the
EtherNet/IP Modules in Logix5000 Control Systems User Manual,
publication
ENET-UM001 .
Your project’s I/O configuration folder now looks similar to this.
IMPORTANT The above ControlLogix Controller Organizer Tree shows a 1756-EN2TR module.
The 1756-EN2TR can be used in Star (using only one port), Device Level, or
Linear ring topologies, or you can use a 1756-EN2T module instead.