Rockwell Automation 1715-OF8I Redundant I/O System User Manual - Manual (Page 108)

108 Rockwell Automation Publication 1715-UM001C-EN-P - March 2014
Chapter 2 Installation Instructions
2. Inspect the identification labels on the sides of the adapter modules and
record the location and the module information shown on the label.
This helps you when installing a new or replacement module in the future
by allowing you to order the replacement parts without disturbing the
system.
3. Check the coding pegs on the termination assembly and verify they match
the sockets on the back of the adapter module.
4. Verify that the slot on the head of the adapter module clamp screw is
vertical.
32085-M
Unlocked Position
32084-M