Rockwell Automation 1715-OF8I Redundant I/O System User Manual - Manual (Page 172)

172 Rockwell Automation Publication 1715-UM001C-EN-P - March 2014
Chapter 5 Configure the Redundant I/O System
The Controller Tags window appears.
3. Locate the adapter module status tag.
The adapter module status tag name is followed by ‘:S.’
4. Expand the twisty for the adapter module status tag to view the status
information for the primary and secondary adapters.
Add a 1715-IB16D Digital
Input Module to the Project
Once the 1715-AENTR adapter module is configured in the project, you are
ready to add I/O modules to the project. In this section, you do the following:
• Add a 1715-IB16D digital input module in Duplex mode to the project.
• Add a 1715-IB16D digital input module in Simplex mode to the project.
Depending on which configuration you choose, you can skip the steps that
do not apply.
Adapter Module Status
tag