Rockwell Automation 1715-OF8I Redundant I/O System User Manual - Manual (Page 199)

Rockwell Automation Publication 1715-UM001C-EN-P - March 2014 199
Configure the Redundant I/O System Chapter 5
7. Click the Connection tab, referring to page 163 .
8. Click the Module Info tab, referring to page 165 .
9. Click the Configuration tab, referring to page 194 .
10. Click the Limits tab, referring to page 195 .
11. Click the Fault/Program Action tab, referring to page 196 .
12. Click OK.
Your project’s I/O configuration folder now looks similar to this.