Rockwell Automation 1715-OF8I Redundant I/O System User Manual - Manual (Page 155)

Rockwell Automation Publication 1715-UM001C-EN-P - March 2014 155
Configure the Redundant I/O System Chapter 5
You now see the new controller in the Controller Organizer’s I/O Configuration
tree.
Step 2: Configure the Controller in the RSLogix 5000 or Logix
Designer Project
1. To configure the controller, in the Controller Organizer, from the I/O
Configuration folder, right-click the new controller you just created and
choose Properties.
Controller Organizer