Rockwell Automation 1794-APBDPV1 FLEX I/O PROFIBUS Adapter User Manual - Manual (Page 66)

Publication 1794-UM064B-EN-P - May 2014
54 Communicate With Your Module
Write Word 6 IC 1 TR IT Q1 Q0 0 0 RV QK CK GO Channel Number
Write Word 7 Not used
Where: PU = Power up unconfigured state
FP = Field power off
CF = Configuration mode
BD = Calibration bad
DN = Calibration accepted
P0 and P1 = Output holding in response to Q0...Q1
W0 and W3 =Wire off current loop status for channels 0 and 1 respectively. (Not used on voltage outputs).
U0 and U1 = Underrange for input channels 0 and 1 respectively
V0 and V1 = Overrange for input channels 0 and 1 respectively
EN = Enable outputs; 0 = output follows S1/S0, 1 = output enabled
IC = Initiate configuration bit
TR = Transparent bit
IT = Interrupt toggle bit
Q0 and Q1 = Hold
RV = Revert to defaults bit
QK = Quick calibration
CK = Calibration clock
GO = Gain offset select
Configure Your Input Channels
Input Channel Configuration
0
3 0
2 0
1 0
0 Set these bits for Channel 0
0
7 0
6 0
5 0
4 Set these bits for Channel 1
Bit Settings Input
Values Data Format % Underrange/
% Overrange Input Range
(2)
Hexadec. Dec.
Module Update Rate
(RTSI = 0) (RTSI = 0), IT = 1
0 0 0 0 Channel not configured
0 0 0 1 4...20 mA signed 2’s complement 4% Under; 4% Over <0000...7878> <0000...30840> 7.5 ms 5.0 ms
0 0 1 0 ± 10V signed 2’s complement 2% Under; 2% Over <831F...7CE1> <-31969...31969> 2.5 ms 2.5 ms
0 0 1 1 ± 5V signed 2’s complement 4% Under; 4% Over <8618...79E8> <-31208...31208> 2.5 ms 2.5 ms
0 1 0 0 0...20 mA signed 2’s complement % 0% Under; 4% Over <0...2710> <0...10000> 7.5 ms 5.0 ms
0 1 0 1 4...20 mA signed 2’s complement % 4% Under, 4% Over <0...2710> <0...10000> 7.5 ms 5.0 ms
0 1 1 0 0...10V signed 2’s complement % 0% Under; 2% Over <0...2710> <0...10000> 5.0 ms 5.0 ms
0 1 1 1 ± 10V singed 2’s complement % 2% Under; 2% Over <-D8F0...2710> <-10000...10000> 5.0 ms 5.0 ms
1 0 0 0 0...20 mA binary 0% Under; 4% Over <0000...F3CF> <0000...62415> 2.5 ms 2.5 ms
1 0 0 1 4...20 mA (1) binary 4% Under; 4% Over <0000...F0F1> <0000...61681> 7.5 ms 5.0 ms
1 0 1 0 0...10V binary 0% Under; 2% Over <0000...F9C2> <0000...63938> 2.5 ms 2.5 ms
1 0 1 1 0...5V binary 0% Under; 4% Over <0000...F3CF> <0000...62415> 2.5 ms 2.5 ms
1 1 0 0 ± 20 mA offset binary, 8000H = 0 mA 4% Under; 4% Over <0618...F9E8> <1560...63976> 2.5 ms 2.5 ms
1 1 0 1 4...20 mA offset binary, 8000H = 4 mA 4% Under; 4% Over <8000...F878> <32768...63608> 7.5 ms 5.0 ms
1 1 1 0 ± 10V offset binary, 8000H = 0V 2% Under, 2% Over <031F...FCE1> <799...64737> 2.5 ms 2.5 ms
± 5V offset binary, 8000H = 0V 4% Under, 4% Over <0618...F9E8> <1560...63976> 2.5 ms 2.5 ms
(1) Underrange for 4...20 mA occurs in the blind area below 0 (3.2 mA).
1794-IF2XOF2I – Isolated Analog Combo Module Read Words
Word/Dec. Bit 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
Word/Octal Bit 17 16 15 14 13 12 11 10 07 06 05 04 03 02 01 00