Rockwell Automation 1794-APBDPV1 FLEX I/O PROFIBUS Adapter User Manual - Manual (Page 78)

Publication 1794-UM064B-EN-P - May 2014
66 Communicate With Your Module
1203-FM1 – SCANport Module Image Table Mapping
Write Word 2 Bit 00 Start new measurment bit - Channel 0 – when set, start new measurement on positive edge.
Bit 01 Start new measurment bit - Channel 1 – when set, start new measurement on positive edge.
Bit 02 Start new measurment bit - Channel 2 – when set, start new measurement on positive edge.
Bit 03 Start new measurment bit - Channel 3 – when set, start new measurement on positive edge.
Bit 04 Reset Counter, Channel 0 – positive edge on this bit resets counter 01.
Bit 05 Reset Counter, Channel 1 – positive edge on this bit resets counter 11.
Bit 06 Reset Counter, Channel 2 – positive edge on this bit resets counter 21.
Bit 07 Reset Counter, Channel 3 – positive edge on this bit resets counter 31.
Bits 08…15
(10…17) Reserved.
Write Words
3 and 4 Bit 00…15
(00…17) Reserved.
0
Logic Status Channel 1
Annalog Feedback Channel 1
Logic Command Channel 1
Annalog Reference Channel 1
Logic Command Channel 2
Annalog Reference Channel 2
Not Used
Logic Status Channel 2
Annalog Feedback Channel 2
Connection Status Channel 2 Connection Status Channel 1
Connection Enable Channel 2 Connection Enable Channel 1
1152