Rockwell Automation Motion Control PTO Application Building Block - Manual (Page 15)

Rockwell Automation Publication CC-QS033A-EN-P - February 2014 15
Micro800 Controller PTO Axis Setup Chapter 1
6. Expand the Ports (COM & LPT) group, and locate the Allen-Bradley® 1203-USB device.
The COM port is specified in parenthesis next to the device name, COM3 in this example. It can be different on
your computer.
7. Note your COM port name and close the Device Manager window.
8. To configure an RS-232 DF1 driver, start RSLinx® Classic software.
9. From the Communication menu, choose Configure Drivers.