Rockwell Automation Motion Control PTO Application Building Block - Manual (Page 43)

Rockwell Automation Publication CC-QS033A-EN-P - February 2014 43
System Validation Chapter 2
Configure the IP Address for Your PanelView Component Terminal
Follow these steps to configure a static IP address on the PanelView Component terminal.
1. From the Main menu, press Communication to open the Communication screen.
2. Press Set Static IP Address.
3. Configure the IP Address and Mask values so they are in the same range as your Micro800 controller.
4. Press Main to return to the Main menu.
Transfer Your HMI Application to the PanelView Component Terminal
Follow these steps to transfer your HMI application to the PanelView Component terminal operator interface terminal.
1. Choose your HMI application.
2. From the General properties check that Validity is TRUE.
3. If Validity is FALSE, right-click PVC application and choose Validate Application.
A Validation Result dialog box shows various warning for overlap object and if the application is valid Validity
displays TRUE.