Rockwell Automation Motion Control PTO Application Building Block - Manual (Page 19)

Rockwell Automation Publication CC-QS033A-EN-P - February 2014 19
Micro800 Controller PTO Axis Setup Chapter 1
2. From the Connection Browser, under AB_DF1-1, select your drive (01, AB DSI) and click OK.
A drive is added to the Project Organizer and the drive's Device Details window appears in the main project
workspace.
3. Follow these step to reset the drive to default settings.
This provides consistent drive settings.
a. From the Toolbar, click the Wizard icon.
TIP First time uploads take longer.