Rockwell Automation Motion Control PTO Application Building Block User Manual
Page 88
88
Rockwell Automation Publication CC-QS033A-EN-P - February 2014
Appendix D Configure a Series A Kinetix 3 Drive
6. Connect the drive to your personal computer with the RS-232 serial communication cable.
If RS232 port is not available, you can do this with an available USB port and USB/RS232 converter.
Follow these steps to connect the Kinetix 3 drive to your personal computer and the Ultraware software.
1. From your personal computer, start the Ultraware software.
2. Select Create new file and click OK.
3. If you receive a warning that the COM port is not available, click OK.
4. Connect the IEEE1394 connector of 2090-CCMPCDS-23AA, RS-232 serial communication cable to
your drive and the serial connector to your personal computer.
Item
Description
1
Kinetix 3 drive
2
RS-232 serial communication cable, catalog number 2090-CCMPCDS-23AA
3
Personal computer with Ultraware software
3
2
1