Rockwell Automation Motion Control PTO Application Building Block - Manual (Page 24)

24 Rockwell Automation Publication CC-QS033A-EN-P - February 2014
Chapter 1 Micro800 Controller PTO Axis Setup
Configure the Micro800 Controller
In this section you generate or get a Connected Components Workbench project with servo drive for a PTO application.
You do this by using the CCAT generation function or download the starting project Starting_PTO_r6 from sample code.
To get a starting project go to the website:
http://search.rockwellautomation.com/
search?site=sample_code&client=samplecode&output=xml_no_dtd&proxystylesheet=samplecode .
Change to Your Controller Type
If the starting project does not use your controller, this section shows you how to change it. In this Quick Start, we use
Micro800 controller catalog number 2080-LC50-24QBB.
Follow these steps to change the controller.
1. Right-click the Micro830 and choose Change Controller.
The Controller Change dialog box appears.