Rockwell Automation Motion Control PTO Application Building Block User Manual
Page 47
Advertising
Rockwell Automation Publication CC-QS033A-EN-P - February 2014
47
System Validation Chapter 2
From Axis_01 screen in Auto mode, you can monitor the following status:
• Axis command velocity
• Axis command position
• High Speed Counter (HSC) count
• Axis status
• Servo drive status
Here you test the manual control of the Building Block. There are two manual modes for selection, Basic and Advance
modes. Press Manual and Axis_01 buttons to enter the first manual screen.
Advertising