Welch Allyn 1500 Patient Monitor v.1.4.X - User Manual - Manual (Page 115)

8
111
Settings
Setup menu overview
The setup menu contains the view, and alarm settings, along with patient information
entry, patient mode, hemodynamic and drug calculations, and other general settings for
the monitor. Many of these settings are also found in the individual parameter settings
(see
“Monitoring and Measurements” on page 39 ).
The Setup menu is displayed as follows:
1. Press the Setup button .
2. With the trim knob, select the menu option.
3. Press the trim knob to display the menu.
The setup menu options are as follows:
The following pages give an overview of the settings available.
Note The menu will vary for different monitor configurations and enabled options.