Displaying trend data in the measurements screen – Welch Allyn 1500 Patient Monitor v.1.4.X - User Manual User Manual
Page 34
30
Operation
Welch Allyn 1500 Patient Monitor
Displaying trend data in the measurements screen
The HR trend can also be displayed in the waveforms:
Press the Setup button
. and select Waveforms. Scroll down for more options.
The trend data can be displayed in waveform 2 or 3 (or 4 if ST is enabled):
Trend data can be displayed for any of the following:
•
Heart rate
•
RR (see example above)
•
etCO
2
•
fiCO
2
•
IPI when selected in parameter display)
•
SpO
2
•
P1, P2, P3 P4
•
NIBP
•
T1
•
T2 (when selected in parameter display)
•
ΔT (when selected in parameter display)
•
CO or CI (when selected in parameter display)
Note
When the trend waveform is displayed and it is highlighted and selected with
the trim knob (see next page), options appear at the bottom of the waveform (as
shown on the example above) to:
•
Change the interval (15 mins to 24 hours)
•
Change the waveform scale
•
Obtain a printout