Defining parameter fields, Ion (see – Welch Allyn 1500 Patient Monitor v.1.4.X - User Manual User Manual
Page 29
Advertising
Directions for use
Operation
25
Defining parameter fields
1.
Press the Setup button
.
2. Select Parameters.
The screen will vary according to the licensed options:
•
etCO
2
, ST and CO
are only displayed when the options are licensed.
•
The Masimo settings enabled (yes / no), gives extra settings for SpO2
measurement (see
on page 68) and is only displayed when the
Masimo module is installed.
•
The Temperature options are only available when two temperature connectors are
installed on the patient panel.
•
The IBP options are only available when four IBP connectors are installed on the
patient panel.
Advertising