Welch Allyn 1500 Patient Monitor v.1.4.X - User Manual - Manual (Page 122)

118 Settings Welch Allyn 1500 Patient Monitor
• Purge patient data and continue - This will confirm the patient mode, but delete all
patient data.
• Cancel (do not change patient mode) - This will not change the patient mode and
will keep the current patient data.
Restore user defaults
The saved user settings are enabled. The user-defined settings are saved in the Setup
System menu (see
“Saving the user-defined settings as default” on page 21).
Administrator
The administrator and service screens provide system information and option settings.
The Administrator screens are entered from the settings menu:
Setup Menu > Administrator
Administrator sub-menus can only be accessed with a password. The passwords are
divided into clinical, service and factory passwords and only clinical settings are available
for the user. The other menu options on this menu are for Welch Allyn service personnel.
Options are enabled in the service menu; please contact Welch Allyn. The passwords for
the alarms and system sub-menus are as follows:
• Setup > Administrator > Alarms: 49, 48, 46 (Clinical Password).
• Setup> Administrator > System 49, 48, 46 (Clinical Password).
• No password is needed to view the Configuration. Other sub-menus are intended for
service personnel only.
Note Integrated Pulmonary Index™ (IPI) is age specific and if enabled, all IPI trend data
is deleted when the patient mode is changed. A message appears on the
confirmation screen (above) to state this.