YSI ADV6600 - Manual (Page 13)

Section 1. Introduction to the ADV6600
ADV6600
Y S I
Environmental
Page 3
If you have any questions about this product or its application, please contact YSI’s Technical
Support department or authorized dealer for assistance.
1-4. Unpacking and Inspection
Inspect the outside of the shipping box for damage. If any damage is detected, contact your shipping
carrier immediately. Remove the equipment from the shipping box. Some parts or supplies may be
loose in the shipping box so check the packing material carefully. Check off all of the items on the
packing list and inspect all of the assemblies and components for damage.
If any parts are damaged or missing, contact your YSI representative immediately. If you purchased
the equipment directly from YSI, or if you do not know which YSI representative your equipment
was purchased from, please call 1-800-897-4151 for assistance.
1-5. Safety Considerations
The acoustic pulses transmitted from the ADV6600 sensor poses no safety concerns under all
normal operating conditions which are likely to be encountered by the user. However, YSI does
recommend that users avoid direct skin contact with the transmit transducer (the circular yellow disk
in the center of the Doppler arm) while the Doppler sensor is active.
Please contact YSI Technical Support at 800-897-4151 if you have any questions about the use of
your ADV6600.
Transmit Transducer