ADLINK IMB-S90 - Manual (Page 104)

IMB-S90 IPMI User’s Manual
104
3.9.2.1 Procedure:
1. Click Advanced Settings.
Advanced Remote Video Settings
a. Check Enable to enable the Remote Video Support.
Note: The Server Address, Source Path and Share Type will be enabled only
if the Remote Video Support option is enabled.
b. Enter the Server Address.
c. Enter the Source Path.
d. Select the Share Type from the drop-down list.
e. Enter the User Name, Password and Domain Name in the respective fields.
f. Click Save to save the settings.
2. Select a video and click the Play Video button to play the video.
3. Select a video and click the Download button to download and save the video.
4. Click the Delete button to delete the selected video.
Note:
A maximum of only 2 Video Files can be recorded and available for access, with
each recording limited to 5 minutes (300 Seconds) if Remote Video Support is
enabled else 5.5MB or 20 seconds whichever is earlier.
If the Recorded Video Files are stored in RAM(Remote Video Support is not
enabled), then those video recordings will not be persistent upon BMC Reboot. If
Remote video Support is enabled recorded video files can be accessible after BMC
reboot. The Play Video and Download video buttons are active only for the KVM
enabled users.
If the Recorded Video Files are stored in RAM, then those video recordings will not be
persistent upon BMC Reboot.