ADLINK IMB-S90 - Manual (Page 46)

IMB-S90 IPMI User’s Manual
46
3.7.9 Network
In MegaRAC GUI, the Network Settings Page is used to configure the network settings for
the available LAN channels.
To open Network Settings page, click Configuration > Network from the menu bar. A
sample screenshot of Network Settings Page is shown below.
Network Settings Page
The fields of Network Settings page are explained below.
LAN Interface: Lists the LAN interfaces.
LAN Settings: To enable or disable the LAN Settings.
MAC Address: This field displays the MAC Address of the device. This is a read only
field.
IPv4 Settings: This option lists the IPv4 configuration settings.
Obtain IP Address automatically: This option is to dynamically configure IPv4 address
using DHCP (Dynamic Host Configuration Protocol).
IPv4 Address, Subnet Mask, and Default Gateway: These fields are for specifying the
static IPv4 address, Subnet Mask and Default Gateway to be configured to the device.