ADLINK IMB-S90 - Manual (Page 40)

IMB-S90 IPMI User’s Manual
40
The fields of LDAP/E-Directory Settings Page are explained below.
Advanced Settings: To configure LDAP/E-Directory Advanced Settings. Options are
Enable LDAP/E-Directory Authentication, IP Address, Port and Search base.
Add Role Group: To add a new role group to the device. Alternatively, double click on a
free slot to add a role group.
Modify Role Group
:
To modify the particular role group.
Delete Role Group: To be delete a role group from the list.
3.7.5.1 Procedure
3.7.5.1.1 Entering the details in Advanced LDAP/E-Directory Settings Page
1. In the LDAP/E-Directory Settings Page, click Advanced Settings. A sample
screenshot of Advanced LDAP/E-Directory Settings page is given below.
Advanced LDAP/E-Directory Settings
2. To enable/disable LDAP/E-Directory Authentication, check or uncheck the Enable
checkbox respectively.
Note:
During login prompt, use username to login as an ldap Group member.
3. Enter the IP address of LDAP server in the Server Address field.
Note:
IP Address made of 4 numbers separated by dots as in ‘xxx.xxx.xxx.xxx’.
Each Number ranges from 0 to 255.
First Number must not be 0.
Supports IPv4 Address format and IPv6 Address format.
4. Specify the LDAP Port in the Port field.