ADLINK IMB-S90 - Manual (Page 38)

IMB-S90 IPMI User’s Manual
38
4. To replace an image, select a configured slot and click Replace Image to replace
the existing image. Alternatively, double click on the configured slot.
5. Browse the image File and click Replace
6. To delete an image, select a record and click Delete Image to delete the selected
image.
3.7.4.3 Remote Media
The displayed table shows configured images on BMC. You can configure images of the
remote media server.
Images Redirection
Note:
Only one image can be configured for each image type.
To configure the image, you need to enable Remote Media support using ‘Advanced
Settings’.
To add or replace an image, you must have Administrator Privileges.
Free slots are denoted by “~”
The fields of Remote Media tab are as follows:
Start/Stop Redirection: To start or stop Media redirection.
Add Image: To upload a new image to the device.
Replace Image: To replace the existing image.
Delete Image: To delete the desired image.
3.7.4.3.1 Procedure:
1. To Start/Stop Redirection and configure remote media images, click Advanced
Settings and make sure Remote Media Support option is enabled. If not, disable
Local Media Redirection and then enable Remote Media Redirection.