ADLINK IMB-S90 - Manual (Page 70)

IMB-S90 IPMI User’s Manual
70
Secondary SMTP Server: It lists the Secondary SMTP Server configuration. It is an
optional field. If the Primary SMTP server is not working fine, then it tries with Secondary
SMTP Server configuration.
Save
:
To save the new SMTP server configuration.
Reset: To reset the modified changes.
3.7.18.1 Procedure
1. Select the LAN Channel Number from the drop-down list.
2. Enter the Sender Address in the specified field.
3. Enter the Machine Name in the specified field.
4. In Primary SMTP Server, check Enable to enable the SMTP Support option.
Note: The Server Address can be edited only when the SMTP Support option is
enabled.
5. Enter the Server Address in the specified field.
6. Enable the check box SMTP Server requires Authentication if you want to
authenticate SMTP Server.
7. Enter your User name and Password in the respective fields.
8. In Secondary SMTP Server, check Enable to enable the SMTP Support option.
Note: The Server Address is can be edited only when the SMTP Support option is
enabled.
9. Enter the Server Address in the specific field.
10. Enable the check box SMTP Server requires Authentication if you want to
authenticate SMTP Server.
11. Enter your User name and Password in the respective fields.
12. Click Save to save the entered details.
13. Click Reset to update the entered details.
3.7.19 SSL
The Secure Socket Layer protocol was created by Netscape to ensure secure
transactions between web servers and browsers. The protocol uses a third party, a
Certificate Authority (CA), to identify one end or both end of the transactions.
Using MegaRAC GUI, configure SSL certificate into the BMC. Using this, the device can
be accessed in a secured mode.