ADLINK IMB-S90 - Manual (Page 110)

IMB-S90 IPMI User’s Manual
110
activedir.conf: This file contains the configurations such as sslenable, timeout, racdomain,
adtype, adfilterdc1, adfilterdc2, adfilterdc3, username, password, and rolegroup
information such as name domain and privileges.
openLdapGroup.conf:This file contains the oprnm ldap role group information such as
name domain and privilege.
nsswitch.conf: This file contains the sources to obtain the name service information in the
range of categories and in what order
pam_withunix: This file contains the PAM Order of modules such as IPMI, LDAP,
RADIUS and UNIX.
pam_wounix: This contains the PAM Order of modules such as IPMI, LDAP and RADIUS.
group: This file contains the Linux group. It stores the group information or defines the
user group information in Linux.
passwd: This file contains the user login information for the Linux system
shadow: This file contains the encrypted password information for the clients.
ldap.conf: This file contains the ldap server configuration details such as bindn, binpw,
pam_ password, nss_reconnect_tries, port, port secondary, host, host secondary.
radius.conf: This file contains the radius server IP address, port number, secret, timeout,
privilege etc.
Dependency Configurations - NIL
3.10.1.1.11 Procedure
1. Select the required Preserve Configuration items by either selecting the items
individually by ticking the check boxes or by selecting all or none using Check All
or Uncheck All buttons respectively.
2. Click Save to save the changes.
3. Click Reset to reset the selection.
3.10.2 Restore Configuration
In MegaRAC GUI, this option is used to restore the factory defaults of the device firmware.
This section lists the configuration items that will be preserved during restore factory
default configuration.
Warning: Please note that after entering restore factory widgets, other web pages and
services will not work. All open widgets will be closed automatically. The device will reset
and reboot within few minutes.
To open Restore Factory Defaults page, click Maintenance > Restore Factory Defaults
from the menu bar. A sample screenshot of Restore Factory Defaults Page is shown
below.