ADLINK IMB-S90 - Manual (Page 96)

IMB-S90 IPMI User’s Manual
96
1. Click Video Record > Settings to open the settings page as shown in the
screenshot below.
Video Record Settings Page
2. Enter the Video Length in seconds.
3. Browse and enter the location where you want the video to be saved.
4. Enable the option Normalized video resolution to 1024X768.
5. Click OK to save the entries and return to the Console Redirection screen.
6. Click Cancel if you don’t wish to save the entries.
7. In the Console Redirection window, click Video Record > Start Record.
8. Record the process.
9. To stop the recording, click Video Record > Stop Record.
3.8.1.12 Power
The power option is to perform any power cycle operation. Click on the required option to
perform the following operation.
Reset Server: To reboot the system without powering off (warm boot).
Immediate Shutdown: To immediately power off the server.
Orderly Shutdown: To initiate operating system shutdown prior to the shutdown.
Power On Server: To power on the server.
Power Cycle Server: To first power off, and then reboot the system (cold boot).