ADLINK IMB-S90 - Manual (Page 67)

IMB-S90 IPMI User’s Manual
67
Note: Telnet service will not support secure port. If single port feature is enabled, KVM, CD
Media, FD Media and HD Media ports cannot be edited.
Timeout: Displays the session timeout value of the service. For web, SSH and telnet
service, user can configure the session timeout value.
Note:
• Web timeout value ranges from 300 to 1800 seconds.
• SSH and Telnet timeout value ranges from 30 to 1800 seconds.
• SSH and telnet service will be using the shared timeout value. If the user configures
SSH timeout value, it will be applied to telnet service also and vice versa.
Maximum Sessions: Displays the maximum number of allowed sessions for the service.
Modify: To modify the existing services.
3.7.17.1 Procedure
1. Select a slot and click Modify to modify the configuration of the service.
Alternatively, double click on the slot.
Note: Whenever the configuration is modified, the service will be restarted
automatically. User has to close the existing opened session for the service if
needed.
2. This opens the Modify Service screen as shown in the screenshot below.
Modify Service
3. Service Name is a read only field
4. Activate the Current State by enabling the Activate check box.
Note: The Interface, Nonsecure port, Secure port, Time out and Maximum Sessions
will not be active unless the current state is active.