ADLINK IMB-S90 - Manual (Page 34)

IMB-S90 IPMI User’s Manual
34
3.7.2.5.1 Procedure:
1. Choose the Host Configuration either Automatic or Manual
Note: If you choose Automatic, you need not enter the Host Name and if you
choose Manual, you need to enter the Host Name.
2. Enter the Host Name in the given field if you have chosen Manual Configuration.
3. Under Register BMC, choose the BMC’s network port to register with this DNS
settings.
• Check the option Register BMC to register with this DNS settings.
• Choose the option Direct Dynamic DNS to register with direct dynamic DNS
or choose DHCP Client FQDN to register through DHCP server.
4. IN TSIG Configuration, Enable TSIG Authentication.
• The current file name will be displayed in Current TSIG Private file.
• To view a new one, browse and navigate to the TSIG private file
5. In the Domain name Configuration Settings,
• Select the domain settings from the drop-down list.
•
Enter the Domain Name in the given field.
6. In Domain Name Server Configuration,
•
Select the DNS Server Settings, from the drop-down list.
• Choose the IP Priority, either IPv4 or IPv6.
• Enter the DNS Server address.
7. In DNS Server1, DNS Server2 and DNS Server3, enter the server addresses to be
configured for the BMC.
8. Click Save to save the entries.
9. Click Reset to reset the entries.
3.7.3 System Event Log
This page is used to configure the SEL type, that is Linear SEL or Circular SEL. Linear
SEL type will store the System Event log linearly up to its SEL Repository size and SEL
will be discarded if the SEL Repository is full. Circular SEL type will store the System
Event log linearly up to its SEL Repository size and override the SEL entry if the SEL
Repository is full.
To open System Event log page, click Configuration > Event Log from the menu bar. A
sample screenshot of System Event log page is shown below.